Hi friends,
I need software version 2.50 Logiq 500MD. Can anyone help me? Thank you.
My email is marcelli35@hotmail.com

hi dear friends
as you know, it could be possible to inter configuration with password:000000000 but before, anyone change this password so i cant change the configuration.
i thought if i removed coin battery on board, the device password might be reset, but its not happened.
any body can help me?
thanks

Help please
Gas scavenging is now covered by british standard BS EN ISO 80601-2-13:2012 For the puposes of a bit of research we are doing does anyone know what the current value for induced flow is? Really expensive document to buy just for one little bit of info.
Thanks in advance
Nigel
Clinical Perfusionist

Currently use McKinley Bodyguard 575's and lost all confidence in them. It just so happens that they are due for replacement as they have reached 10 years old.

Looking into the market today for PCAs and its unclear whats out there!

Hello,

Has anybody experienced "error 5" when bipolar power is high on a Conmed Sabre 2400?? Could anybody give me a clue how to repair it? Unit calibrated, bipolar power >32W -> HLP-5. With lower powers everything is ok.

Can anyone help me with service manual for Stryker X8000 Xenon Light Source please.
Thanks

Vismay

Dear all,
does anyone know how to calibrate the flow sensor servo ventilator K.TAKAOKA MONTEREY ?
when using infant flow sensor measured values do not deviate more than 10%. patient setting no more than 6-25 kg.
but when using adult flow sensor measured values deviated almost 2 times of setting tV. patient settings at 50kg.
please give me a hint to solve this problem.
thank you

William Lacourciere - the co-founder of Novametrix - is no longer around.

(note the incorrect spelling of Corometrics in that piece, by the way)

More about the history of Novametrix.

I'd really appreciate it if someone has a manual for the Eschmann ETS3.

We have a Zeiss Lumera 700 chirurgical microscope. One Xenon lamp is burned in the 2 lamps module. I'm wondering if anybody already change one lamp in this kind of lamp module and got good result. I ask this question because according to the Zeiss tech, we always need to change the complete module and not replacing only the burned lamp. Supposely, lamp change in this module must be done by the company only for accuracy and safety purpose. The problem with this is an extravagant price ($4k)! We use to change Xenon lamp in light source without problems so I would like to get your feedback... Thanks.