|
|
|
Technical assistance
|
|
Hello every one..! This is my first participation on the forum...hope it will be a good first try..! So, I have a BSM-2301K that always goes to the Diagnostic Check screen...error : E2PROM...but all the self test (ROM Check and RAM Check) passed..
|
|
Sales - Wanted - Exchanges
|
|
I am looking for have a training in rigid endoscope ? can you help ?
|
|
General assistance
|
|
Mods, Could you kindly enable the edit option for the above post.. Thanks.
|
|
Technical assistance
|
|
Not sure what you are asking, what mode are you in? you have to remember with this vent you set up the CPAP/PEEP first with the pressure display set to MIN, i would suggest in cpap mode, then you set up PIP with pressure display set to max in CMV is
|
|
Technical assistance
|
|
Hi My problem is that when I open the program there is no boot, The loading of program it's not able to complete and frizzing when we do restart for 3 times we can input to program put there are missing part in program( the program work put not compl
|
|
Technical assistance
|
|
dear Mr, i have problem with CT scan from toshiba 64 slice con you help me to solve this problem ? regards , Armenag Adam
|
|
Sales - Wanted - Exchanges
|
|
Welcome to the forum. I can't help but wonder why you would especially be asking about defective rigid 'scopes. But, as you may have "good money" available, there are usually plenty of good used ones to be picked up at the monthly Hild
|
|
|
|
23 registered (Chris Jones, bcarlisle, Shury, obiwan, Hulk, Sandy King, mugtree, Huw, zilog, zedrok, SUZUKI, Darth Welder, jackwu, Stephen Don, BobBanks, lesh, RS, walaa, Gordovan, Bala Vignesh, John Stewart, Armenag, 1 invisible),
384
Guests and
12
Spiders online. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
1
|
2
|
3
|
4
|
|
5
|
6
|
7
|
8
|
9
|
10
|
11
|
|
12
|
13
|
14
|
15
|
16
|
17
|
18
|
|
19
|
20
|
21
|
22
|
23
|
24
|
25
|
|
26
|
27
|
28
|
29
|
|
|
|
|
|
