Hello,

I am planning to buy some older NIBP monitors and need to be able to transfer data from the monitor to a PC. From what I've learned, this will be accomplished through RS232 serial connection. To make this happen, I need information about how the NIBP monitor transmits data. I assume this information is in the service manuals, which I do not have and can not find. I would greatly appreciate it if someone could give me the following information from their dinamap service manuals:

1)Baud (or bits per second)
2)Data bits
3)Parity
4)Stop bits
5)Flow control (Xon/Xoff, Hardware, or none)

I would like this information for Dinamap1846, DinamapXL, Dinamap Plus, Dinamap 8000, Dinamap 8100, or whatever you've got. Information on any NIBP monitors would be great, since I don't yet know exactly what I will end up with, and the more models I have information on, the more options I will have.

Of course, if it is possible to email entire service manuals, that would be great, too. Thanks much.

Max Guyll

This .pdf is not what you're asking for exactly, but it contains some useful information nevertheless. Enjoy!

Meanwhile, see if you can find anything useful here.

Hello

I have a bunch of manuals let me know. I may be a\able to help.

mkm