hi all

i have a problem with puritan Bennett ventilator controller board problem its showing 7212 error any body have idea ?


shijith pp

as per manual Vent inop is active have u managed to pass EST

hii

regarding this issue tray to perform EST test but befor that you You should calibrat fio2

best regard

Hi Shijith
Search the alarm log and the test log, where the 7212 error is logged... and find the previous 2 errors...
Generally the 7212 error is logged because the previous error codes, locate the codes nearest (date speaking) to the 7212 it will help to find the subsystem that generates the INOP status

Best regards
Rafael Gonzalez

hi ,
thanks for the help anybody can get me operation manual,it is giving 7212 and getting restarted again &again

regards shijith pp

when the equipment detects a software error sometimes restarts itself 3 times, after that, the ventilator stays on and then you can check the test log and the alarm log to locate the previous erros...

Best regards
Rafael Gonzalez

thanks a lot..

Shijith sir,
did you find the manual for the 700??? Else post your email Id...

Shijith,

Did you find manual of the 700 series ventilator, if not sent me your emai address.carlionheart@yahoo.com

Carlito

Manual on the http://www.puritanbennett.com/serv/manuals.aspx