Hello Everyone,
We are in need of the PC software to configure/program the above syringe pump and I am hoping that somebody here can send me the needed software by download or email..

Thanks a lot!

Well Im off to the service course shortly, so if you are still stuck then I will contact you when I get back! All the best!

You can programme one by hand then, if I remember correctly, you can copy it from pump to pump by infrared.
No exteral equipment needed after the first one is done.
Only problem is all the pumps have to be of the same software version.
Robert

to update the software to a newr version you will need to do it through the pc. But if you need only to configure the settings you can do it by teach and learn (167).
What are you after?

Hello everybody!
I also need a, who can help me.
E-mail: xito256@163.com
Thank you!

What exactly are you trying to do?

Thank you, Geoff
Thank you for providing the service manual

Just order it from carefusion its free of charge? if you an authorized person there will be no problems, you will need an ir adapter pcb if using ir.

Whats the big deal, take it you purchased the pumps from an autheriszed supplier, sort it with them