Home Articles Downloads Forum Products Services EBME Expo Contact
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Joined: May 2001
Posts: 35
Visionary
Offline
Visionary
Joined: May 2001
Posts: 35
I have emailed you our infopath test spec we use for annual checks using a sigmapace 1000 on 4170's.

If anything does not conform then its out with the scope and function gen, or send it back to APC.

We used to have a homemade bit of test kit but its now been replaced by the sigmapace - homemade kit was better though IMHO! and also the amount learned by making it :O) Still not that we have time for projects like that these days.

anyway hope this helps

Gary

Joined: Apr 2007
Posts: 39
Visionary
Offline
Visionary
Joined: Apr 2007
Posts: 39
Just finished testing one of these today. We bought a new arbitrary wave sig gen (Agilent 33220A) especially to do these (& to replace some older generators we had knocking around). This combined with a Fluke 124 Scopemeter, a calibrated DVM & bench PSU is all you need in terms of test kit. You do have to knock up the 200:1 attenuating test circuit (as shown in the manual) & away you go!
I do find them a bit tricky to test up in our normal workshop as the room seems to be extra noisy from a combination of altitude & loads of fluorescent lights etc., but it can be done.


"When you do things right, people won't be sure you've done anything at all" (Bender, futurama)
Page 2 of 2 1 2

Moderated by  DaveC in Oz, RoJo 

Link Copied to Clipboard
Who's Online Now
1 members (Blazingapostle), 72 guests, and 29 robots.
Key: Admin, Global Mod, Mod
Newest Members
Blazingapostle, Volkswagen, Chris_P, Rhomwa, Aziizi
9,891 Registered Users
Forum Statistics
Forums25
Topics10,814
Posts72,637
Members9,890
Most Online5,980
Jan 29th, 2020
Powered by UBB.threads™ PHP Forum Software 7.7.5