|
|
Joined: Dec 2009
Posts: 70
Scholar
|
OP
Scholar
Joined: Dec 2009
Posts: 70 |
hi every body i have a defibrillator zoll m series that display error " test bridge failed" in service manual wrote to change bridge board or HV module, but i should repair it. i found 3 IGBT that ruined and i changed them, and i tested other part on bridge board but i didn't any broken part. the HV module is sealed with a material like clear glue that i cant open it for repairing. have any body seen this problem ever? please help me for direct contact my email is: s.aghakhani@gmail.com thanks
|
|
|
|
Joined: Apr 2010
Posts: 33
Visionary
|
Visionary
Joined: Apr 2010
Posts: 33 |
Hi Aghakhani,
Just a suggestion whatever you do, make sure the HV Module does not contain any kind of charge, use a HV Probe. I will let you other details as soon as i find out.
|
|
|
|
Joined: Dec 2009
Posts: 70
Scholar
|
OP
Scholar
Joined: Dec 2009
Posts: 70 |
hi Nimish according to your suggestion, what do i do? is HV have any rest charge? should it be discharged? please tell me more brother.
|
|
|
|
Joined: Apr 2010
Posts: 33
Visionary
|
Visionary
Joined: Apr 2010
Posts: 33 |
What i meant was get a HV Probe, check if that HV has charge now if it does have charge like few thousand volts.. than you need to discharge that stuff either by professional discharge kits, there are few risky options to discharge it as well but you try find proper way.
|
|
|
|
Joined: Feb 2010
Posts: 69
Scholar
|
Scholar
Joined: Feb 2010
Posts: 69 |
With hot air blower heat the glue and try to remove it it will come out after doing service u want to apply new glue to the board regards shijith
|
|
|
|
Joined: Dec 2009
Posts: 70
Scholar
|
OP
Scholar
Joined: Dec 2009
Posts: 70 |
With hot air blower heat the glue and try to remove it it will come out after doing service u want to apply new glue to the board regards shijith dear friend did you melt that glue before?
|
|
|
|
Joined: Dec 2009
Posts: 11
Novice
|
Novice
Joined: Dec 2009
Posts: 11 |
Hi Brother Aghakhani
It seems to be that you do not have expereince or proper training on defib or HV side.. It is dangerous to do the job without any knowledge on safety issues.. this is not a handyman job..careful do not put patient and your life at risk..Sorry may be I am wrong or harsh on this topic..
My suggestion is to forum administrator need to more closer look on this type of topics and advices going through this forum to prevent incidents..
|
|
|
|
Joined: Sep 2010
Posts: 386
Sage
|
Sage
Joined: Sep 2010
Posts: 386 |
send him a tutorial video regarding that matter.soon he will not for get you. 
--- PATIENT SAFETY FIRST ---
|
|
|
|
Joined: Feb 2010
Posts: 69
Scholar
|
Scholar
Joined: Feb 2010
Posts: 69 |
u have to discharge the hv capacitor first using discharging kit.then u heat it will not melt at the time of heating u can remove it with a knife.if u r scared dontgo for it
|
|
|
Forums25
Topics10,672
Posts72,077
Members9,764
|
Most Online5,980 Jan 29th, 2020
|
|
|
|
|