EBME Forums Forums Maintenance Technical Assistance Can anyone tell me This Drager flowmeter is what M

Recognizing the Drager an engineer, see Figure this flow meter but do not know what model, do not know how to buy, want to know a friend to help me, thank you

What model is it from?

Drager anesthesia machine detects traffic
I do not know how to buy the same model

This is a piece of Draeger Test equipment part number 790116
it is not off any device and is normal only available to Draeger engineers. contact your local Draeger subsidiary to check its availability

Looks like three Platon NG series (various scales)flowtubes, coupled together to me.
You can check them out on http://www.ctplaton.com/en/products/flow/glass-flowmeters/platon-ng-series.php

Please look carefully at the picture.A meter which can measure air, nitrous oxide.Scale are not the same.Because the density is not the same

If you could get hold of an old rotameter and remove the valves and replace them with nipples you would have the same thing.
Robert
PS Did you know Rotameter was a trade name?

as draeger have already said it is a piece of draeger test equipment 3 flowmeters with varying range.

TO me it looks like the twin flow tubes from a Narkomed 2.
Draeger have said it is only available to their engineers so if someone wants a similar piece of equipment they will have to make their own, such as adapting a Rotameter block
Robert

Monopoly Draeger.Very angry~~