Home Articles Downloads Forum Products Services EBME Expo Contact ☰
Forums Calendar Active Threads
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 3 1 2 3
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
javequipos #58111 08/09/11 10:26 AM
Joined: Jan 2011
Posts: 7
istanbul
erdal Offline
Newbie
Offline
erdal
Newbie
Joined: Jan 2011
Posts: 7
istanbul
could you send me up-897md service manual please

thanks
erdal
erdal.bozkurt@gmail.com
Recruitment / Jobs
Advertise your jobs with EBME
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Roberto Siqueira #68259 09/09/14 8:13 PM
Joined: Aug 2014
Posts: 9
India
Girish Arora Offline
Newbie
Offline
Girish Arora
Newbie
Joined: Aug 2014
Posts: 9
India
Please Send me service manual for UP D897/UP 897MD.

Email: girishrkarora@gmail.com

Thanks
Girish Arora
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Roberto Siqueira #68260 10/09/14 3:06 PM
Joined: Jul 2002
Posts: 2,020
Permenantly in "The Smoke"
RoJo Offline
Hero
Offline
RoJo
Hero
Joined: Jul 2002
Posts: 2,020
Permenantly in "The Smoke"
No need to double post Girish

My spelling is not bad. I am typing this on a Medigenic keyboard and I blame that for all my typos.
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
RoJo #68264 10/09/14 8:05 PM
Joined: Aug 2014
Posts: 9
India
Girish Arora Offline
Newbie
Offline
Girish Arora
Newbie
Joined: Aug 2014
Posts: 9
India
Sorry Friends for double post. Please help me with this service manual.

Girish Arora
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Girish Arora #68265 10/09/14 8:32 PM
Joined: Feb 2004
Posts: 14,815
Likes: 72
the path less trodden
Geoff Hannis Offline
Super Hero
Offline
Geoff Hannis
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72
the path less trodden

Frank has the 895.

Not sure how much use that would be to you. smile

If you don't inspect ... don't expect.
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Geoff Hannis #68266 10/09/14 8:39 PM
Joined: Aug 2014
Posts: 9
India
Girish Arora Offline
Newbie
Offline
Girish Arora
Newbie
Joined: Aug 2014
Posts: 9
India
Thanks Geoff for your reply. have downloaded that but the schematics are a bit different in 895 and 897.
Problem with our machine was with the feed. It was out of order, I checked and found that fuse was blown, replaced it with same rating new fuse. Feed button worked while we tested, but after a few hours door button, feed buttons are not picking up signals.
895 shows this is problem with Main IC but the pinouts are different and thats why service manual is needed to diagnose the exact point of problem.

Girish Arora
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Girish Arora #68267 10/09/14 8:56 PM
Joined: Feb 2004
Posts: 14,815
Likes: 72
the path less trodden
Geoff Hannis Offline
Super Hero
Offline
Geoff Hannis
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72
the path less trodden

Which fuse? ... and has it blown again? think

If you don't inspect ... don't expect.
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Geoff Hannis #68268 10/09/14 9:06 PM
Joined: Aug 2014
Posts: 9
India
Girish Arora Offline
Newbie
Offline
Girish Arora
Newbie
Joined: Aug 2014
Posts: 9
India
Fuse 1.25A. This time it has not blown. Buttons Feed and Open for door are not working.
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Girish Arora #68269 10/09/14 9:15 PM
Joined: Feb 2004
Posts: 14,815
Likes: 72
the path less trodden
Geoff Hannis Offline
Super Hero
Offline
Geoff Hannis
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72
the path less trodden

Just a guess ... but I would take a look at the motor(s).

Good Luck! smile

If you don't inspect ... don't expect.
Re: MANUAL SERVICE PRINTER UP 890 MD UP 897MD
Geoff Hannis #68270 10/09/14 9:20 PM
Joined: Aug 2014
Posts: 9
India
Girish Arora Offline
Newbie
Offline
Girish Arora
Newbie
Joined: Aug 2014
Posts: 9
India
Motors are fine have checked them with external signal. Don't know if this is the problem with Main IC or the actuators because there is no signal when we press those feed and open door buttons.
Page 2 of 3 1 2 3

Moderated by  DaveC in Oz, RoJo 

Link Copied to Clipboard
Who's Online Now
1 members (daisizhou), 12,013 guests, and 148 robots.
Key: Admin, Global Mod, Mod
Newest Members
AraEmin, Edouardohaag, Mark B, Royal, davidarhui
10,392 Registered Users
Forum Statistics
Forums26
Topics11,281
Posts74,584
Members10,392
Most Online69,877
Jul 17th, 2026
Forum Rules · Mark All Read · Forum Help · EBME Forums
Powered by UBB.threads™ PHP Forum Software 7.7.5