Home Articles Downloads Forum Products Services Seminar Contact
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
Electrical Safety testers with 62353 standard #73915 08/01/19 10:52 AM
Joined: Mar 2018
Posts: 5
Yaser Offline OP
Newbie
OP Offline
Newbie
Joined: Mar 2018
Posts: 5
Hi, can anyone recommend an appropriate electrical safety tester that supports the new 62353 standard. We're looking in to getting a few new ones. We've been having trouble with our existing tester, the Fluke ESA615. Any benchworking or portable testers you'd recommend?
thank for your time in advance!

Re: Electrical Safety testers with 62353 standard [Re: Yaser] #73916 08/01/19 7:01 PM
Joined: Feb 2004
Posts: 13,823
Geoff Hannis Online Content
Super Hero
Online Content
Super Hero
Joined: Feb 2004
Posts: 13,823

Rigel is the obvious answer ...

... and also has the advantage of being British! smile

Re: Electrical Safety testers with 62353 standard [Re: Yaser] #73917 08/01/19 8:18 PM
Joined: Feb 2007
Posts: 248
MikeX Offline
Master
Offline
Master
Joined: Feb 2007
Posts: 248
Indeed Rigel are the ones we use and have proved to be quite reliable.

You could also look at the Datrend vPad-Rugged 2 (https://www.datrend.com/product/vpad-rugged-2/). This is easy to use and has good templates if you need to generate reports. It can even produce PDF reports from test results on a user template.

Although a Canadian company they have agents and service support here in the UK and seem to be responsive to user needs. After a demo I spotted some improvements that could be made to the user interface software and these were implemented within weeks.

As always it depends on your needs and how you intend to use the meters (auto/manual) and if you need to feed the data into an external database.

Re: Electrical Safety testers with 62353 standard [Re: MikeX] #73918 08/01/19 8:38 PM
Joined: Feb 2004
Posts: 13,823
Geoff Hannis Online Content
Super Hero
Online Content
Super Hero
Joined: Feb 2004
Posts: 13,823

But the Rigel is hand-held, of course.

It looks like the Datrend range has really expanded in recent years, Mike (I tried their early infusion pump tester - the Infutest 2000 - fifteen years ago, and liked it very much). If I was setting up again now as a "mobile technician" I would seriously consider* the vPad-Rugged 2 - mainly because it looks so er, rugged - and (surely the main point), it reminds me of the Good Old Rigel 233.

But even more than that - it looks like it could be the modern successor to the venerable medTester! smile

* Depending how the price shapes up, naturally.

Re: Electrical Safety testers with 62353 standard [Re: Yaser] #73919 09/01/19 11:30 AM
Joined: Mar 2018
Posts: 5
Yaser Offline OP
Newbie
OP Offline
Newbie
Joined: Mar 2018
Posts: 5
Thank you Geoff and Mike, we were leading towards Rigel, any particular model? i assume were talking about the 288+?

Re: Electrical Safety testers with 62353 standard [Re: Yaser] #73920 09/01/19 5:31 PM
Joined: Feb 2004
Posts: 13,823
Geoff Hannis Online Content
Super Hero
Online Content
Super Hero
Joined: Feb 2004
Posts: 13,823

No; you're assumption is wrong there. In your opening post you mentioned 62353. smile

62353+
288+

The 288+ is the more capable of the two ... but do you need those extra features and/or accessories?

Why not seek quotes for both models, then make up you mind? think

Re: Electrical Safety testers with 62353 standard [Re: Geoff Hannis] #73924 10/01/19 1:01 PM
Joined: Feb 2004
Posts: 13,823
Geoff Hannis Online Content
Super Hero
Online Content
Super Hero
Joined: Feb 2004
Posts: 13,823

you're assumption - your assumption
you mind - your mind

I was hoping to snare the Grammar Police* with those, but they must still be in deep cover. whistle

* Mind your words, or they'll mind them for you.

Re: Electrical Safety testers with 62353 standard [Re: Yaser] #73946 18/01/19 10:54 AM
Joined: Nov 2018
Posts: 24
rsysmexk Offline
Dreamer
Offline
Dreamer
Joined: Nov 2018
Posts: 24
I recently purchased the 288+ and highly recommend it. I rigel/seaward provide good product support if needed too.

Re: Electrical Safety testers with 62353 standard [Re: rsysmexk] #73958 18/01/19 4:57 PM
Joined: Feb 2004
Posts: 13,823
Geoff Hannis Online Content
Super Hero
Online Content
Super Hero
Joined: Feb 2004
Posts: 13,823

But how about this* for a completely different approach to it all! smile

* Pity that the EST only has AAMI and NFPA options (as well as 110 Volts working).

Re: Electrical Safety testers with 62353 standard [Re: Yaser] #73989 28/01/19 5:30 PM
Joined: Mar 2018
Posts: 5
Yaser Offline OP
Newbie
OP Offline
Newbie
Joined: Mar 2018
Posts: 5
We've recently trialed (And trialing!) the Vpad rugged 2 that mike recommended and its performing really well, the criteria i'm looking for in any electrical safety tester is:
-support the new 62353 standard
-Allows step by step function for testing
-Portable / rugged and easy to carry
-Option to add peripherals (such as keyboard mouse)
-easy to use with enough customization
-Records can be downloaded easily without the hassle of software downloads

From the initial demo, the device is packed with features and ticks all the boxes above. it runs on an android tablet as the interface, (yes there are security issues here) which allows quite a lot of potential for a portable tester, you could download manuals, have an excel sheet or quick notes for guides or videos to help with testing if need be. the tests run through in semi- automatic mode and can stop after every test if you choose (step by step) with power on / off delay, as mike said, records can be instantly turned to PDF through the tablet and download straight to the pc via micro usb to usb connection, no software or gimmicks required. One of the amazing features showcased in the demo was if the standard changes, the app can be updated to update the software through WiFi. it also has a bar-code scanner to incorporate preset records. its still early days but its looking promising as a tester, only time will tell if stands up to the resilience it claims to be, android has a lot of potential for modernizing too. i also found out the repair and service center is based in Bristol i think so it doesn't go to Canada if for some reason you encounter repairs, so downtime is minimal.

Hope this helps.

Page 1 of 2 1 2

Moderated by  Huw 

Who's Online Now
3 registered members (Geoff Hannis, Huw, Angus), 181 guests, and 34 spiders.
Key: Admin, Global Mod, Mod
Newest Members
Amadeus, Sigid Subagyo, jimncl, Anoop, zizo
9446 Registered Users
Events
Philips - National Conference
SCCT Study Day
Forum Statistics
Forums25
Topics10,420
Posts70,607
Members9,445
Most Online1,391
Mar 26th, 2018
Powered by UBB.threads™ PHP Forum Software 7.7.2