I have a replacement sieve canister for the EverFlo. I need to remove the black muffler from it because I'm replacing the sieve beds on a HomeLox, not the EverFlo. Same hardware but, with the HomeLox, another line goes inline with the muffler because there are two compressors. The problem is, Phillips didn't attach the port to the CENTER of the muffler for some ODD reason so when I start to unscrew it, the lobsidedness of it causes the muffler to hit against the sieve beds. Very odd that they would do it that way.

Any help would be appreciated. Thanks!

Here is a pic of it: [img]https://drive.google.com/open?id=1yFeYSmyk6-6_TFBlyWiUjGSi5TZJzLpT[/img]