Has anyone ever maintained m3001a module? Someone can offer the voltage transformer specification (S5, S6, S7) in module ? S5-9140-1989;S6-9100-5611;S7-9100-5609.
Thanks!

I have maintained the MMS module, Philips did not recommend component level repairs, only PCB replacement.

I am unsure what Philips allow you to do in Taiwan?

Allow? Would Philips still own the kit, then?

As far as I know, but Tesco have put a bid in !

we still do the modules replacement.I am just interested to want to understand the circuits.Because we don't have the manuals.

As you may have already realised, julio, the World of Biomed is polarised roughly into two camps. One with adequate funding and everything necessary available to them. The other where techs have to struggle on with next to nothing.

How do you get on with modern SMT components? It seems to me that some can be changed, whilst (many) others are, shall we say, a bit difficult (or impossible).

Meanwhile, have you seen this link?

Thanks,I already read that reports.So,we try to repair the modules.

Thank you! I also learn some

I purchased 1200 Roller Pumps for the MMS 3001A module . The part # to the pumps is P36B02R. Is this the correct pump from Oken Seiko? I need help selling them at a loss . I can't repair these machines.

What is the nominal voltage of the Gold Capacitor located in the power board ?

I find only 3V with my voltmeter...

what the service manual say?

I found nothing about it

3volts look like supply for the memmory?

Yes, but nominal voltage of gold capacitor is 5.5V, so...

Forthermore, do you know the signification of the Red light on the MMS server in the two following cases ?
- RED LED Light blinking
- RED LED lights permanent