EBME Forums

olympus bx 40

Posted By: Chet

olympus bx 40 - 29/07/19 1:14 PM

Hello, I am wanting to know if anyone has information on to repair a Olympus bx40 microscope--problem having is that the two images does not overlap properly . Thank you for any help received.
Posted By: Geoff Hannis

Re: olympus bx 40 - 29/07/19 1:28 PM


Welcome to the forum, Chet. smile

Are you sure you have an actual fault ... and not a case of "operator error"? think
Posted By: Chet

Re: olympus bx 40 - 29/07/19 2:07 PM

Thanks for the welcome and this will be the second time we have had to service this microscope for this problem. The client states that the images do not overlap properly and yes we have suspected operator error. We are not familiar enough with this microscope to say yes or no on operator error.
Posted By: Geoff Hannis

Re: olympus bx 40 - 29/07/19 2:19 PM


My money still goes on "operator error" (what else can it possibly be?).

Check out the Troubleshooting Guide in the Instruction Manual (or, better still, get the user to go through it with you). smile
Posted By: Chet

Re: olympus bx 40 - 29/07/19 3:00 PM

Ok thank you for the help.
© 2019 EBME Forums: Biomedical and Clinical Engineering Discussion Forums.