EBME Forums Forums Maintenance Service Manuals & Schematics Stryker 30L highflow insufflator error 04

Hi NickM,

thanks for your post it helps me a lot, by the way can i have a copy of your manual? please email it to me, thanks in advance

Regards,

June

Hi NICK
I am having ERROR 21 in stryker 30L insufflator. And there is another one ERROR 03 in Stryker 20L insufflator.
Please do help me out..
Or if u can send me service manual.
What ever easy for you.
Waiting for quick reply.
Regards

Error 21 is Fluid Sensor Error - Check and clean fluid sensor and all tube, replace if necessory.

Error 3 - Initialization error - Replace the CPU PCB.

Please beaware this unit is obsolete and stryker do not support it or spare parts anymore.

Dear NickM
Thanks brother.
About the location of FLUID SENSOR. Any location diagram or where to look.
Thanks in advance.
Regards

It's an "L" shaped connector at the front of the unit.

Thanks Nick. I hsve found out one sensor in one of two horizontal tubes just behind the display board. It is HONEYWELL MICRO SWITCH three pin (+IN, GND, OUT) black body with some kind of optical sensor in the path of that pipe... Is this the same..??

Hi can you help me, I have a insunfflator 40 L Stryker with a error on the display say CONTAMINATION And nothing more I can not do any other thing ,and also ask for secure code.
I'll appreciate it any of your help. Thanks.

Requires a calibration, do you know when this was last done?

Not I do not.

How can I do it? Or what should do?
Thanks.