EBME Forums Forums Maintenance Service Manuals & Schematics Stryker 30L highflow insufflator error 04

Hi Inzunza, unfortunately i've been away from work today due to flooding in Brisbane, Queensland, Australia. Closing down our office.

If I get a chance I will forward through the calibration procedure via email in the next few days.

Basically the things you will need is a full bottle of co2 gas, 2 x 50ml Syringes, and a co2 pressure gauge.

The calibration procedure is fairly straight forward otherwise.

Thanks NickM not problem , I'll wait until you have time for it, hope you do not forget it .

Dear Nick I also would need calibration procedure.please send at my email also dcads_mrkt@yahoo.com

Hi i´m have the same problem with contamination on the display, can you help mi to solve it? i revove a little dusts in the outlet tube, but i don´t know how reset the unit, the unit is a 40 stryker, thanks for your help..

Hi, I have two Stryker 40L insufflators that I have brought back from a mission hospital in rural Guatemala. They both have an error message without a number. The error message is "SENSOR DEFECT." Any help would be appreciated. Does anyone have a service manual??

Hi Ted this is due to contaminated gas you will need to replace the fluid sensor and LPU (Low Pressure Unit)

Part Number: 0105199130
Description: COMPLETE PNUEMATICS UNIT LPU

and the fluid sensor

Part Number: 105190933
Description: FLUID SENSOR

As this is for a mission hospital Stryker may be able to sort out some sort of donation repair, contact your local stryker rep if not let me know and I will see what I can do.

All the best

Nick (Field Service Engineer - Stryker South Pacific)

thanks Nick,
The Stryker rep here does not seem to know how or if parts can be ordered. Do you know what these parts would cost or how I can get them?
Thanks,
Ted

dear nick
i have stryker 20 liter and older 40liter with ereror 21 can you send me the copy of service mannula
I had the coppy of stryker newer 40 L high flow and misplaced it can you help
and send me a copy of that
the eror is faulty valve

dear nick hi
i have two of the 40l insufflator with calibration error on one and regulator error on the other can you help please

Does anybody know how to reset a 40L Stryker insufflator?
If you do, can you post here or email me?
My email is notwen_cardozo@hotmail.com