Hi Rob,
Been and had a look at our system, I told you wrong this morning the inverter is a 150W unit, (Mascot 9984, RS 363-5299) this unit is connected to the 12v supply sockets within the ambulance directly (we needed to extend the supplied cable), the inverter number I told you this morning connects via “screw hook” terminals this unit wasn’t used in the end as these terminals in the ambulance we use to connect directly to the incubator itself.
Regarding the system itself we have a Drager TI500 bolted to a Ferno ITU six trolley, there are a number of bonding straps between the two units, (incubator and trolley) and the inverter and distribution block are fastened to a tray under the trolley, the inverter is bolted through some existing holes in the shelf and the block is simply sat behind it.
Hope that all makes sense!!
Regards
Matt.
