I worry about confusion between MS16 and 26! Within in this DGH it has been decreed that all MS26 will run at 48mm/day or 8ml in 24 hours (and we don't have any MS16, at least not on wards). So I have had some overprinted aluminium foil labels made which cover the control twiddlers but have a window to allow the set rate to be seen/confirmed.
The idea is they can't change the rate and so we only need to check the pump at these switch settings.
Our community people use MS16 exclusively so I hope to fit the same label on these things which will be set to 2mm/hour. Only problem seems to be our local hospice who might want to use 4mm/hr (ie 8ml in 12 hours).
