Hi Manoj thanks for your help. I’ve downloaded the Rigel guide and it’s been very useful. I’m a little confused over a couple of things though and would like clarification if possible. For Class 2 insulation tests it states you need to use an auxiliary cable to the enclosure us g tin foil if necessary. I understand this OK but later on for the Class 2 current leakage tests does this cable still need to be attached? In the diagram there is a cable shown going to the enclosure so I’m thinking it does. It says all applied parts and enclosure are tied together and current to earth is measured. On Class 2 equipment where is it measuring to if for example the earth pin is plastic in the plug top so there’s no connection to the earth inside the tester? Is it done via the auxiliary cable? I’ve attached a picture with the two areas circled. Hope this makes sense but if not please let me know so I can try and explain a bit better. I’m just not comfortable selecting a sequence on a machine and not knowing what and how it is measuring and conducting the tests and really want to know what it’s doing. Thanks
