EBME Forums Forums Maintenance Test Equipment Pressure calibration syringe

Print Thread

Rate Thread

Re: Pressure calibration syringe brompton #78001 22/08/24 12:31 PM
Joined: Oct 2011 Posts: 279 Likes: 22 china daisizhou Master
daisizhou Master Joined: Oct 2011 Posts: 279 Likes: 22 china	DPM-1B is a perfect solution. Unfortunately, DPM-1B has been discontinued. I haven't found any new manufacturers producing it. BIO-TEK seems to have produced it for a while. daisizhou#sina.com (#=@)

Entire Thread
Subject	Posted By	Posted
Pressure calibration syringe	brompton	20/08/24 2:12 PM
Re: Pressure calibration syringe	Geoff Hannis	20/08/24 4:04 PM
Re: Pressure calibration syringe	Malcolm	21/08/24 9:43 AM
Re: Pressure calibration syringe	Geoff Hannis	21/08/24 11:29 AM
Re: Pressure calibration syringe	Malcolm	21/08/24 9:45 AM
Re: Pressure calibration syringe	daisizhou	21/08/24 12:16 PM
Re: Pressure calibration syringe	Geoff Hannis	21/08/24 1:06 PM
Re: Pressure calibration syringe	daisizhou	21/08/24 1:18 PM
Re: Pressure calibration syringe	Geoff Hannis	21/08/24 1:24 PM
Re: Pressure calibration syringe	daisizhou	21/08/24 1:45 PM
Re: Pressure calibration syringe	Geoff Hannis	21/08/24 2:35 PM
Re: Pressure calibration syringe	daisizhou	22/08/24 3:37 AM
Re: Pressure calibration syringe	Geoff Hannis	22/08/24 9:04 AM
Re: Pressure calibration syringe	daisizhou	22/08/24 10:15 AM
Re: Pressure calibration syringe	Geoff Hannis	22/08/24 11:17 AM
Re: Pressure calibration syringe	daisizhou	22/08/24 11:31 AM
Re: Pressure calibration syringe	Geoff Hannis	22/08/24 11:53 AM
Re: Pressure calibration syringe	daisizhou	22/08/24 11:57 AM
Re: Pressure calibration syringe	Geoff Hannis	22/08/24 12:24 PM
Re: Pressure calibration syringe	daisizhou	22/08/24 12:59 PM
Re: Pressure calibration syringe	Malcolm	26/08/24 10:23 AM
Re: Pressure calibration syringe	Geoff Hannis	26/08/24 11:53 AM
Re: Pressure calibration syringe	daisizhou	26/08/24 10:36 PM
Re: Pressure calibration syringe	daisizhou	27/01/26 2:53 AM
Re: Pressure calibration syringe	Geoff Hannis	27/01/26 7:02 PM

Moderated by Huw

Link Copied to Clipboard