EBME Forums Forums Maintenance Technical Assistance Drager Evita 2 ( How arrange the internal boards )

Hi, All Friends
I need to how to arrange the internal board of the unity of Evita 2, I hope to have pictures .
As somebody who has the dismantling of the Board and has not installed again .
This my Emil : hmh2005_forever@hotmail.com



Thanks,

The internal pcb board location for the Evita range follows a common layout (as does the pneumatic section).

Has someone removed componants from a specific pcb which you are trying to identify ?

You will need to provide futher information, if you require assistance from this forum.

Hi, Sean Fearon
I need to be installed all boards inside the unit for Evita 2, not Evita 2 Dura .




Thanks,

https://www.ebme.co.uk/forums/ubbthreads.php/topics/40388/Draeger_Evita_service_manual

Covered in a previous post, though link seems a bit temperamental

I have this service Manuel, but does not have what I want, this Service for Evita2 Dura, i want Evita2 only, no Dura .
I want pictures of the Board and are within the unit .

Dare I suggest that you may need to resort to a little (careful) "trial and error" with this one, Hassan?

Hi, Geoff Hannis
I'm waiting for you, Happy New Year .
I do not want to experiment, I want someone who has the same unit the filming of the unit from the inside ( all the boards inside the device ) several clear images, and then download these images or sent to the my email address .
hmh2005_forever@hotmail.com

Yes, my friend, we understand what you are asking for.

Unfortunately, I don't have that machine available here, else those photos would already be with you.

But being, as you mention, the New Year Holiday, I doubt that you can hope for too much help now until next Tuesday at best!

I cannot visualise the details of the Evita 2, but if I were there in your shoes, I guess I would "experiment" a little.

But, at least the lesson is being learned again about the need to sometimes take notes when working on equipment. In this case, when yanking out all the boards and setting them aside (although I appreciate that it was not you who did that).

Happy New Year, Hassan.

Thank you very much, I did not I do that .



Happy new year,

Can you send me a picture of what you measn so i can help you?