EBME Forums Forums Maintenance Technical Assistance Drager Caleo Incubator Error 31

Hi,

Has anybody had an error 31 from a Drager Caleo?

I would like to discuss if you have.

Thanks for reading this

Richard

Error code on caleo hv 5 digit as follow X.XXXX,
there's no 2 digit error code, please verify the code.

Gouw,

2 Digit error codes are indeed used on the Caleo.

Richard,

Error 31:- Short-Circuit mulitplexer. Error in analog electronics.

Manual recommends following the diagnostics for WT2 Sensor PCB and replacing if necessary.