EBME Forums Forums Maintenance Service Manuals & Schematics Bennett Xray Service manual MODEL cm 425

Please,if you have service manual and error codes for BENNETT X-RAY CM 425.So i can determine which parts to change.Because the supplier here is close already.Thank very much..
Rotor is functioning but during exposure "relay error with beef sound and code " is flashing. Please help me Thanks

Did you find this BENNETT CM-425 SERVICE manual?
i am also looking for one!

Thanks
Marius
p.s. After taking 5 xrays, without any reason, the outpput voltage goes down 10% (ex: the monitor is always showing 80kv but the output goes from 80 KV to 72 KV),

I think i have solution to your problem, i have page 3 of the service manual that is showing how to test the relay with a single meter. That's the only page i have for this cm-425 xray.

Thanks a lot marius ,i already fix the machine by re-inserting all cables from Generator and tubes.Thanks for your support and God Bless you

That voltage drop sounds like a bad connection somewhere, which only makes itself a nuisance as things start to warm up. As mentioned by our friend above, try re-making (and cleaning) the HT cable and tube connections. If that doesn't help, look for a poor connection elsewhere, possibly a loose nut, or screw, on a heavy duty connection someplace.

Meanwhile, I'm still pondering this one:-


Did you mean a chattering relay? Or a beeping alarm sound (the latter, I guess).

I FOUND A BENNETT CM 425 SERVICE MANUAL,
IF SOMEONE NEED-IT, LET ME KNOW,
MARIUS

Hi. Marius.
can you send me a copy of this manual.
My email is renato acosta67@gmail.com

hi,
I need help on the repair of the device(bennett HFQ8000P x-ray)
error mesage: MAIN EEPROM ERROR(B0E0)
best regards
birol

Hi birol,
have you try to replace the EEPROM BOARD or the EEPROM itself?
best regards.

Hi Marius.

i am looking for this Bennett, can you send to me at vanduchung@gmail.com

Thank in advance