EBME Forums Forums Maintenance Service Manuals & Schematics manual RT200 Timeter

Is there anyone who has a (digital)manual for the old Allied RT200 Timeter?

Sometimes, very rarely, it comes up with a "HELP-E" message, and I would like to know what this messages means.
A manual would be useful, however if there is somebody who can tell me what this error code means,this would be very helpful also.

Many thanks in advance.

Range,
The message HELP-E.
The manual states "a computational error. This should never occur. Make note of applied conditions the rrror occurs in and contact the factory.

Hi:

I have one paper copy
If you wish I could scan it. just let me know

Regards

Hi Mr Beltran, Good day to you. I am wondering if it is possible for me to get a copy of the manual of the RT 200. I would appreciate your assistance.

Thank you very much.

I would also like a copy of Timeter RT-200 manual.
My mail: mxmichal@gmail.com

Ok just post your email adress

Thanks

Its already there!!

sir can you send me a copy of Timeter Rt-200 manual.thanks in advance.ead_tagari@yahoo.com

Welcome to the forum Adonis.

I have a .pdf for the RT-200. It's not the best manual in the world, but if you can give me a day or two I'll get it to you.

Done! Interesting bit of kit, the old RT-200. The signals from the two modules vary as frequencies dependent upon transducer output. So we're looking at Voltage Controlled Oscillators. I wonder why they did it like that. Maybe it gives greater accuracy. Anyone know?