EBME Forums Forums Maintenance Technical Assistance Fresenius Pilot A2 Syringe Pump CTRL Error

hi friends,

i have a problem about Fresenius Pilot A2 Syringe pump. When i turn on the pump, "CTRL" error appear on the screen. i have controlled sensors and clamp but they looks normal.

is there anyone who have got an idea?

Faruk
the message CRTL on all Fresenius syringe pumps is to let you know thet the pump is due a service which you do using their PC control our through the service mode in the pump but you need their calibration tools and the service manual to guide you

John thanks for your interest. if you have got a service manual can you send me please ??

John a lot of thanks for your interest and service manual. i have learned a method about CTRL error disappearing.

"decrease the year of date (in eeprom) by enter the "tst1" menu and power off the device. when power on the device CTRL error disappear and you can use the device."

but i dont recommend this method for safety using.

sincerely

Faruk
you have cleared error message but be aware the pump is still due a service and as that model is quite old I would not recommend using it without a service