EBME Forums Forums Maintenance Technical Assistance Fresenius INJECTOMAT AGILIA

Hello!
Perhaps somebody knows the maintenance code for INJECTOMAT AGILIA. The pump working correctly. Battery is about 80 % nominal capacity, oclusion warning is about 420 mmHg, correctly recognizes different types of syringes( 5,10,20,30,50), all syringe sensors are ok., all alarms working correctly. Needs only erasing the maintenance required message. Whether somebody can help me?

mlato16@wp.pl

Best Regards

Martin

Montykeedy
you need to do Full PPM Service to get rid of message this involves entering service mode or using fresinius service software on you PC but you need all the calibration tools from fresenius to carry out a correct servie as the is much more to testing the pump than the quick test you mention