Home Articles Downloads Forum Products Services EBME Expo Contact ☰
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 5 of 5 1 2 3 4 5
Joined: Apr 2008
Posts: 23
Dreamer
Offline
Dreamer
Joined: Apr 2008
Posts: 23
Back when I was a Biomed doing high current earth bonding tests I always wondered if it was ever posible, in a case where there were only a few strands left making a the connection, that the test could pass milliseconds before the strands burned out? Would ALWAYS the heating of the strands cause high resistance ?

Joined: Feb 2004
Posts: 14,815
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72

Remember that there is usually a time element to the PE test.

Perhaps the only "belts and braces" method is a 10 Amp test for five seconds, followed by a low current test thirty seconds or so later! Hopefully (and if all is well), the same resistance readings should be achieved. How about that?

Remember where you heard it first, folks! smile


If you don't inspect ... don't expect.
Joined: Feb 2007
Posts: 303
Likes: 17
MikeX Offline OP
Master
OP Offline
Master
Joined: Feb 2007
Posts: 303
Likes: 17
But using the high current may mask a real problem such as poorly oxidised contacts that are fixed by the application of a high current..... until the connector is disconnected and re-connected causing the high resistance to return! Not exactly safe!

I am now coming to the conclusion that we should stick to a low current test and look for the source of any failure with this low current. Maybe the annual replacement of all IEC mains leads will become a ritual!

Joined: Feb 2004
Posts: 14,815
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72

Yes, but an expensive (and time consuming) one, perhaps ... suitable only for government hospitals!

OK, let's try the other way around:- the low current test first, followed immediately by 10 Amps for five seconds. If the results are the same, then everyone should be happy.

Followed, of course, by a second low current test, just to be sure! smile


If you don't inspect ... don't expect.
Joined: Feb 2004
Posts: 14,815
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72

Originally Posted By: biomedbill
Not sure about the green colour though, light blue would be better.

It looks like good news, then, Bill. smile


If you don't inspect ... don't expect.
Joined: Feb 2004
Posts: 14,815
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,815
Likes: 72

A link that still works. smile


If you don't inspect ... don't expect.
Page 5 of 5 1 2 3 4 5

Moderated by  DaveC in Oz, RoJo 

Link Copied to Clipboard
Who's Online Now
1 members (daisizhou), 24,655 guests, and 97 robots.
Key: Admin, Global Mod, Mod
Newest Members
Pip Fox, Engzaki, MacMc, AraEmin, Edouardohaag
10,395 Registered Users
Forum Statistics
Forums26
Topics11,288
Posts74,594
Members10,395
Most Online69,877
Jul 17th, 2026
Powered by UBB.threads™ PHP Forum Software 7.7.5