EBME Forums Forums Maintenance Technical Assistance Logiq 500 (timekeeper?)

I'm having a problem with a ge logic 400. It wouldn't boot up so I replaced the timekeeper battery. Now I need to reprogram the date into ram but have been unable to do this. Can someone tell me how to do this?

The full service manual is freely available is the GE Healthcare Common Documentation Library.
But in essence, you need to:

Top Menu Select
Highlight Set Up
Sub menu to User Utility
Select Time Adjustment
Input new time by using keyboard the press enter
Input format for time is HH:MM
Put a "-" character in front of the time to decrease the current time

Probably worth noting that you can only adjust the time within plus or minus 12 hours.
Service Manual does not specifically identify how to alter date!
This may be taken from system BIOS?

Hi friends,
Also I'm repairing a logic 500 with the same problem. I replaced the battery timekeeper, was discharged 0.5V instead of 2.8V but will not start the sw. Only writes: CPU MEMORY TEST: SUCCESS and stop 2135131-4. I can not enter the system ID, no display lights on the keyboard.
What can be? Thanks in advance
Gerardo

Hi friends,
i connect Logiq 500 to laptop with hiperterminal. Now i can read this message:
*** VENUS SYSTEM RESET/START ***
*** BBRAM contents are corrupted ***
VTSH>
VTSH>*** VENUS SYSTEM READY ***
PWRD : rt_reqprdmsg error [1100a]
Can you help me?

hi
Alessandro can i have please your e-mail my own is dedieu_03@yahoo.fr
GOD Bless

Hi
Alessandro please can you e-mail me at dedieu_03@yahoo.fr i have a probleme with my Logiq 500 Pro the same like you

Dear dealers,
we can supply logiq 400/500 hard disks
Time keeper replacement is not successfull to solve booting isuues of logiq 400/ 500 machines.
we will repair Cpu ethernet address PCb of Logiq 400/ 500 machines
which is having problem like cpu memmory test success, no further bootting problems

shyjumon
www.ultrasounds engineers.com

shyjumon@hotmail.com
india

Hello
Dear Colleagues,
Write me on private e-mail address f.panci@panci-electronic.com if you need help regarding with Timekeeper and booting problem on GE Logiq 400/500. I can help everybody for free.
Best regards.

Frepa_AL,
Thank you a lot for a quick response and invaluable help, that you gave! The instruction you send me was very helpful. The device was put into operation.

With Best Regards! Kirill.