EBME Forums Forums Maintenance Technical Assistance Fresenius Injectomat TIVA Agilia Software Control

Hi David
I have spoken with my colleague John Harte and he mentioned you have had a discussion re the above problem. I was just wondering if you have been able to solve your problem by initially doing the calibration directly via the pump and then repeating it with the Agilia Partner software? I have found this technique to work successfully for other slightly strange issues I have had with the Agilia Injectomat/Volumat and also with the DPS/MVP/Optima range. We dont use the Agilia range yet for TIVA procedures as we use the DPS in conjunction with the Base Primea. If the problem still exists I feel the cause maybe, as you alluded to, permissions associated with the partner access code you are using as they do have hierarchal security rights. I wont divulge the complete 16 bit code in an open forum but if you have one where the last 3 digits are 691 try it. Let us know how you get on.
Regards
Declan

Hello,

please i have agilia injectomat and when i turn it on display show error message 28 (0002) keyboard. When the display show this message i can´t trun unit off and i need disconect main power and battery. I have already change the keyboard but the unit still show error message ( the same error 28 (0002) ). Can anybody help me please ? And if somebody have service manual for agilia injectomat send me it please.

Regards,

Peter

Rebelion
error 28 is as you say for a faulty keyboard it is also for display board try replacing it see bellow
28 ! Keyboard. ! Check the keyboard, test 10.
! Replace the keyboard.
! If the problem remains, replace the display
board.
John

Thank you a lot a will replace display board and then i will say you resault.

Regards

Peter

I changed the display board and display. Now its look everthink is work now i hope. Thank you a lot for advice.

Regards

Peter