EBME Forums Forums Maintenance Technical Assistance Mammomat 3000 anode won't rotate.

Hi I have a couple of bad Mammomat 3000's. I wondering if there is anybody that could help me with this?

The anode will not rotate. It has no error code. I double checked every cable and made sure everything is connected properly, but it still will not rotate.

I actually have 2 machines with his problem.

Thanks

Strange that you're not getting Error 601.

To save time, perhaps other users of this forum need to be aware that you have already received detailed advice about this problem before.

True but that didn't solve the problem.

Have you solved the problem now, then?

Otherwise ... Vesper's clues looked pretty detailed to me.

What's the present situation ... two machines down?

And ... in detail:- no voltage at the rotor coils?

What does the circuit diagram show you? And what stage are you now at with your fault-finding efforts?

ebmeNeophite how's your mammomat?

Hey.

Sorry to take so long to respond to this thread.

There was a miscommunication on my part and I'm here to fix it.

The title of this thread should be "C-Arm, Stand angulation does not rotate"

So, I reported the wrong error and thus Vespers recommendations didn't work. Which is the thread that Geoff linked to.

The actual error and fix is over HERE.

I such a dummy one of the machines didn't rotate because I had no buckys in the machine. How am I supposed to know? Right? Wrong!!!

Well now I know.

The other machine I couldn't fix it and it was sold as is. I'm almost positive it was the switches k2-k3 on board D802 or the pulse width modulated signal. It would only rotate when connected to the up/down signal.

If anyone needs any more details ask me.