EBME Forums Forums Maintenance Technical Assistance Problems with STRYKER camera, 1188HD

Hi,

I have a problem with the STRYKER camera 1188HD

When turn on, the message "SYSTEM ERROR" apear in the screen and Color bar background. With camera head or without.

Does anyone have the service manual or more important the value of these Test Points in the console.
TP28, TP29, TP30, TP31, TP32, TP33

Best Regards,

Jorge H

SYSTEM ERROR means there is a problem with the camera head cable, this cable will require replacement.

Restarting the camera console should clear the System Error message.

...or test the cable continuity.

Ok, How can I restarting the camera console?

I tried with another camera Head and the problem continues.

..so its not the camera head..the system itself..
try to re set..

we have stryker also but lihgsource endoscopy, and the problem that i found out is the xenon bulb..

I have a stryker 988 camera . The problem is the white balance is taking lot of time and mostly it’s not ok. After it is ok the colours are not clear. I get more of red /blue . The image not clear. What can be the possible problem and it’s solution.

Can you please guide me how to reset the stryker 988 camera. I would be oblized if you can give me the service manual for Stryker 988.