Home Articles Downloads Forum Products Services EBME Expo Contact
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 4 of 5 1 2 3 4 5
#7350 19/11/06 12:57 PM
A
Anonymous
Unregistered
Anonymous
Unregistered
A
Quote:
At our hospital we are signed up to a form of legislation that im sure if you checked (which im sure you will! ) most places are. We have what is called a "Tea-Break" system, where after several hours toil we are allowed to conduct short experiments involving the passing of electronics through a definely sized metal bar, that is submerged in water and in a confined space!
Actually I think you'll find that your contracted hours don't necessarily include tea-breaks - I thought it was at the discretion of your employer or manager something like that and not laid down in stone as an entitlement......check it out.

Incidentally I'm certain that, despite being one of the relatively few EBME departments to change bleep speakers, fit batteries the right way around, replace battery doors, cases, etc, you're not the only person to have irregular breaks - myself and colleagues of mine tend to start work early, don't always have regular breaks and when we do they're flexible - which, personally speaking, gives me an opportunity to post in "my own time".

Usually to share knowledge, advice or useful information on medical devices, etc - if you look at the majority of my posts they're in my own time, i.e. after work. Don't see much about the repair of telecoms on this site though. I see that when the argument's lost the typical tactic of ridiculing individuals is always a safe bet. Quite amusing when the "right buttons" are pressed though.

I try not to be spiteful when I lose an argument and never take it personally - my way of working is just to up the ante and wind people like you up more and more to get a response like your previous post actually. I've given my views on Telecoms and to answer the initial question no we don't touch telcoms equipment.

#7351 19/11/06 5:52 PM
Joined: Jun 2001
Posts: 464
Mark.N Offline OP
Sage
OP Offline
Sage
Joined: Jun 2001
Posts: 464
Rest Breaks
27.15 Where the working day is longer than six hours, all staff are entitled to take a break of at least 20 minutes. Rest breaks must be taken during the period of work and should not be taken either at the start or the end of a period of working time. Employees should be able to take this rest break away from their work station. In exceptional circumstances and by agreement with the worker, where a rest break cannot be taken the unused entitlement should be claimed as a period of equivalent compensatory rest. Line managers should ensure that provision is made to allow compensatory rest to be taken. Existing local arrangements which already provide for breaks of more than 20 minutes (e.g. lunch breaks) will meet the requirements of this provision and no further action will be needed.

Cheers
Mark

#7352 19/11/06 6:28 PM
A
Anonymous
Unregistered
Anonymous
Unregistered
A
Quote:
Existing local arrangements which already provide for breaks of more than 20 minutes (e.g. lunch breaks) will meet the requirements of this provision and no further action will be needed.
This is what I was getting at..........morning and afternoon rest breaks, i.e. tea-breaks, don't necessarily have to be given if a break for lunch is provided - as far as I've always interpreted it, anyhow. Anything additional to the 20 minutes lunch break, minimum, is discretionary and not obligatory.

As I said:

Quote:
Actually I think you'll find that your contracted hours don't necessarily include tea-breaks - I thought it was at the discretion of your employer or manager something like that and not laid down in stone as an entitlement......check it out.

#7353 20/11/06 7:58 PM
Joined: Jan 2005
Posts: 31
Visionary
Offline
Visionary
Joined: Jan 2005
Posts: 31
Hi All,

Our set up at North Middx. Hospital is now called the Medical Equipment Management Unit, incorporating EBME. (We used to come under Medical Physics a few years ago but all that changed under a new Head of Medical Physics who wasn't interested in our line of work.)
However, the clue to what we repair is in our name. In general, we only repair Medical Equipment i.e. equipment associated with patients. Although, from time-to-time we may have a quick look at other equipment as a favour e.g. I've looked at problems with two-way radio system for the porters as requested by my manager etc. It's normally only a quick look to see if there's a simple fault, blown fuse, broken connection that type of thing. Mind you, some of the hospital Ward Clerks must think that we do everything.
The other day I answered a phone call:
Q. "is that Medical Physics?"
A. "No, Medical Equipment Management Unit, is it Medical Physics that you want?"
Q. "I don't know but I was given your number - we need more toilet paper in the ladies toilet!" A. "that's not us - we repair medical equipment! You need the cleaning company"
Q. "Are you sure, I was definatly given your number?"
A. " You've been given the wrong number!!!!"
This isn't a wind up. It's absolutly true. I wish I could of recorded it. (Geoff knows the idiots we've got working in our hospital).
So beware, we will be changing the bog paper next!

#7354 21/11/06 3:05 PM
Joined: Feb 2004
Posts: 14,807
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,807
Likes: 72
We all know how much you enjoy answering the phone, Ian. smile


If you don't inspect ... don't expect.
#7355 21/11/06 7:07 PM
Joined: Jan 2005
Posts: 31
Visionary
Offline
Visionary
Joined: Jan 2005
Posts: 31
But Geoff I now only answer the phone when our answering service (Mr T.T. the workshop supervisor)) isn't around moreover, I'm polite at all times, as you well know. By the way, are you still known as Mr Sheen? eek laugh cool

#7356 22/11/06 6:35 PM
Joined: Feb 2004
Posts: 14,807
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,807
Likes: 72
Sadly, Ian, other names are used these days, more often than not. I don’t think I know your Mr. T, do I (not the A-Team guy, I suppose)? And yes, your politeness is well-known, and much admired, throughout the boroughs of North East London. Cheers, Geoff. smile


If you don't inspect ... don't expect.
#7357 24/11/06 8:32 PM
Joined: Jan 2005
Posts: 31
Visionary
Offline
Visionary
Joined: Jan 2005
Posts: 31
Hi Geoff,

Mr T.T. is my nickname for our workshop supervisor for whom you were involved at the interview stage. This guy has a problem when he talks to people face-to-face in that he's always T ouching his T od**r (to check that it's still there?)
I don't believe that he realises what he his doing. It's some sort of nervous reaction due to his very poor interpersonal skills! Hence, the nickname Mr T.T. - OK. confused smilewink

#7358 25/11/06 12:15 AM
Joined: Jun 2001
Posts: 464
Mark.N Offline OP
Sage
OP Offline
Sage
Joined: Jun 2001
Posts: 464
Must be a military thing - all that standing to attention...are you dressed correctly.

Means nothing to me. I was in the merchant navy.

No, it doesn't suit me!

Cheers
Mark

#7359 25/11/06 12:54 PM
Joined: Feb 2004
Posts: 14,807
Likes: 72
Super Hero
Offline
Super Hero
Joined: Feb 2004
Posts: 14,807
Likes: 72
Hey Ian, was this affliction apparent before the poor guy tried to sort you lot out, I wonder? Sounds to me like “Mr. T.T.” needs a bit of TLC (...is there much of that there these days?). But have you considered that he could just be signalling that he’s “pleased to see you”, as it were? smile

I don’t think the guy in question is an ex-military type, Mark (...part of the problem, really). But there again, I don’t know why I should feel sorry for him, (unlike me) he’s drawing a salary after all. frown


If you don't inspect ... don't expect.
Page 4 of 5 1 2 3 4 5

Moderated by  DaveC in Oz, RoJo 

Link Copied to Clipboard
Who's Online Now
1 members (daisizhou), 1,923 guests, and 16 robots.
Key: Admin, Global Mod, Mod
Newest Members
Nick.A, Tdayve, AdrianT82, Iagonuns, Dctm
10,371 Registered Users
Forum Statistics
Forums26
Topics11,259
Posts74,523
Members10,371
Most Online59,530
Apr 30th, 2026
Powered by UBB.threads™ PHP Forum Software 7.7.5