Having waded through, not only John’s piece on RCM, but this complete thread as well (yes, a bit of a marathon), I would suggest that three posts stand out as worthy of repeating once again:-

Richard Ling on 02-Nov-03

Originally Posted By: Mr R J Ling
The environment the kit is used in and how it is used, or abused, makes the difference. Ideas of reliability tend to fall apart when there are other influences. The other thing is the reluctance of users to report damage and other minor faults with equipment so it looks, on paper to be more robust and "reliable" than it actually is.


Roy on 10-Nov-03

Originally Posted By: Roy
To sum up: -

If you've been trained by the manufacturer to service it, then service it - exactly as you've been shown.

If you've got to repair it, then carry out the tests in the manual before putting it back into service. If there isn't a manual (because the machine is too old) then write a test schedule / worksheet, verify it and then stick to it.

If you haven't been trained to service it and you don't have a manual, then don't service it. Get the Trust to pay for a service contract or accept the risk of not servicing it.


Geoff Hannis on 24-Feb-04

Originally Posted By: Geoff Hannis
My recommendation is to talk instead about *Risk* Centred Maintenance, whereby maintenance resources are targeted at equipment most likely to adversely affect "patient outcomes" if not properly supported (eg, defibrillators, ventilators, dialysis units, IV pumps ... and so on down the line). In essence, the way to start is to rank all equipment according to "patient-risk" and take it from there.


Thinking about it, I realize that Risk-Centred Maintenance (of which I am a keen proponent) is really a sub-set of Reliability-Centred Maintenance (pity, then, that they both carry the same initials)!

What’s in a name? RCM is just an evolution in the history of the maintenance of technical equipment. Many grand titles have been used before for the properly-conduction technical support of medical equipment. Remember Terotechnology (BS 3811) … whatever happened to that?

And what I would say now, John, is what we need are simple steps to be taken (a check-list, even) in order to achieve (or at least aim in the right direction of) the lofty goals contained within RCM. My bet (and sincere hope) is that most well-organized techs are following the path already! smile

Last edited by Geoff Hannis; 03/04/07 10:35 AM. Reason: Minor tweaks

If you don't inspect ... don't expect.